Our agricultural snowblowers are sized as 5', 6', 6 ½', 7' (all single); 7' double, 8' single and double and the 8 ½' single. These farm duty blowers come with many additional options to make them commercial blowers, but be assured that no snow gets left behind with these models.

View Online Brochure

  
Agricultural Models Available
84-S, 96-S
102 HDS, HHD
90P
 HH Series - Skidsteer Mount
*NEW* Side Discharge Option Now Available On 84" and Larger Snowblowers - click here
Snowblower Operators and Parts Manual - click here
 
SIDE
download Adobe Acrobat Reader to view brochures
Download Adobe Acrobat Reader to view and print our online brochures
DISCHARGE OPTION
SIDE DISCHARGE OPTION ON 84" and LARGER SNOWBLOWERS

Features:
- Orbital motor powered rotating fan housing allowing side discharge left or right.
- Hardened/replaceable "clips" for housing
to rotate against.

Advantages:
- increased fan capacity
- reduction in horse power required
- blowing snow into wind is no problem as snow is discharged low on the fan housing


View Online Brochure

Side Discharge Option
- click on image for larger image -
click to view larger image
84-S
download Adobe Acrobat Reader to view brochures
Download Adobe Acrobat Reader to view and print our online brochures
96-S
84-S, 96-S - These are our most popular farm duty blowers with many additional options available to make them commercial duty. Both blowers boast a 10"X30" dia. close tolerance, 4 balde fand with large easy turning chutes to handle the large volume of snow you'll be putting through it.

The 84-S uses 5/16" re-inforced end-plates while the
96-S gets 7/16". These blowers come standard with hydraulic hood turner assembly's and optional single or double auger (one 20" or two 16") to ensure that no snow gets left behind.
CUTTING
WIDTH
AUGER
FAN
WEIGHT
(LBS)
84"
20"
30X10"
965
96"
20"
30X10"
1025
84-S, 96-S
 - click on image for larger image -
click to view larger imageclick to view video clip

Download and print our online brochure for this product by clicking on the link below. (Adobe Acrobat required)
84-S, 96-S - OPTIONS
  • Flex Hood
  • Bolt-on cutting edge
  • Wing edges
  • Truck loading chute
  • Front Mount Kit
  • Double Auger
View Online Brochure

102-HDS
download Adobe Acrobat Reader to view brochures
Download Adobe Acrobat Reader to view and print our online brochures
102-HHD
102 HDS, HHD - With its 8 1/2' cutting width and heavy duty gear box and PTO, this blower is capable of handling up to 160hp. It's 12X30" fan and oversized chute give it loads of capacity for even the most demanding conditions.

This blower has a long list of options including bolt-on cutting edge, truck-loading chute, 1000 rpm and orbit motor hood rotation which makes it extremely versatile and capable of any task put to it.
CUTTING
WIDTH
AUGER
FAN
WEIGHT
(LBS)
102"
20"
12X30"
1445
102"
16"&16"
12X30"
1690
102 HDS, HHD
 - click on image for larger image -
click to view larger imageclick to view video clip

Download and print our online brochure for this product by clicking on the link below. (Adobe Acrobat required)
102 HDS, HHD - OPTIONS
  • Flex Hood
  • Cutting Edge
  • Bolt-on cutting edge
  • Wing edges
  • Hydraulic motor for hood turner
  • Electric-hydraulic cylinder
  • Truck loading chute
  • 1000 rpm
View Online Brochure

90-P
download Adobe Acrobat Reader to view brochures
Download Adobe Acrobat Reader to view and print our online brochures
90-P
90 P - Have you got a long lane, don't like to back up but have to get snow out of your way? Consider hooking your mid-size tractor on to one of our pull-type blowers and leave the snow behind you.

It comes standard with a cutting-edge on the bottom to help cut through the tire marks, hydraulic hood turner and wear shoes on the back to keep you out of gravel when the ground is soft. This two-stage blower is easy on horse-power and easy to operate.
CUTTING
WIDTH
AUGER
FAN
WEIGHT
(LBS)
90"
20"
30X10"
1080
90 P
- click on image for larger image -
click to view larger imageclick to view video clip

Download and print our online brochure for this product by clicking on the link below. (Adobe Acrobat required)
90 P - OPTIONS
  • Flex Hood
  • Bolt-on cutting edge
  • Hydraulic hood turner
    (standard on 7' and larger)
View Online Brochure

HH Series
download Adobe Acrobat Reader to view brochures
Download Adobe Acrobat Reader to view and print our online brochures
HH Series
SKIDSTEER MOUNT HYDRAULIC DRIVE
(HH SERIES) - Our hydraulic driven snow blowers are available with many options to fit on a wide variety of machinery, with sizes ranging from 4' to 8'. Options include wing edges, bolt-on cutting edges, 12 volt actuators to control hood deflection and rotation.

To maximize the blower's performance, we have at least a dozen different hydraulic motors available to use your hydraulic gallonage and flow to its greatest potential. The Quick-attach hook-up is mounted directly to the back of the fan housing and braced to all four corners of the blower for extra rigidity.
CUTTING
WIDTH
AUGER
FAN
WEIGHT
(LBS)
60"
16"
24x8"
660
72"
16"
24x8"
715
78"
16"
24x8"
750
HH Series
- click on image for larger image -
click to view larger image

Download and print our online brochure for this product by clicking on the link below. (Adobe Acrobat required)
HH SERIES - OPTIONS
  • Flex Hood
  • Bolt-on cutting edge
  • Wing edges
  • Hydraulic motor for hood turner
  • Electric-hydraulic cylinder
  • Truck loading chute
View Online Brochure

 
Smyth Welding & Machine Shop Ltd.

37452 Glen’s Hill Road
R. R. #2
Auburn, Ontario
N0M 1E0

Voice: 519-529-7212
Fax: 519-529-3277
E mail: info@smythwelding.com
 
view site map
©2004 Smyth Welding & Machine Shop Inc.
site created by Thyme Square Media