SIDE DISCHARGE OPTION ON 84" and LARGER SNOWBLOWERS

Features:
- Orbital motor powered rotating fan housing allowing side discharge left or right.
- Hardened/replaceable "clips" for housing
to rotate against.

Advantages:
- increased fan capacity
- reduction in horse power required
- blowing snow into wind is no problem as snow is discharged low on the fan housing

108 HDD - Our heavy-duty 9' double auger blower is our toughest blower yet. It has two 20" augers, 12"X36" fan and a drive line capable of over 200 hp.
Standard features on this blower include 1/2" thick, re-inforced fan blades, 3/16" thick fan housing and body, 7/16" thick end plates, 3/4" thick "A" frame and hitch clevis and #80 heavy roller chain for the auger drive.

Hardened and ground gearbox shafts and gears as well as shear-bolt protection on the PTO and auger-drive ensure many hours of trouble-free blowing and with a weight just over 2000 lbs., you know you've got one rigid piece of equipment.

108 HDD - OPTIONS

Flex Hood Bolt-on cutting edge Wing edges Hydraulic motor for hood turner Electric hydraulic cylinder Truck loading chute Front Mount Kit 1000 rpm

---

- return to top of page -

---

102 HDS, HHD - With its 8 1/2' cutting width and heavy duty gear box and PTO, this blower is capable of handling up to 160hp. It's 12X30" fan and oversized chute give it loads of capacity for even the most demanding conditions.

This blower has a long list of options including bolt-on cutting edge, truck-loading chute, 1000 rpm and orbit motor hood rotation which makes it extremely versatile and capable of any task put to it.

102 HDS, HHD - OPTIONS

Flex Hood Cutting Edge Bolt-on cutting edge Wing edges Hydraulic motor for hood turner Electric-hydraulic cylinder Truck loading chute 1000 rpm

---

- return to top of page -

---

SKIDSTEER MOUNT HYDRAULIC DRIVE
(HH SERIES) - Our hydraulic driven snow blowers are available with many options to fit on a wide variety of machinery, with sizes ranging from 4' to 8'. Options include wing edges, bolt-on cutting edges, 12 volt actuators to control hood deflection and rotation.

To maximize the blower's performance, we have at least a dozen different hydraulic motors available to use your hydraulic gallonage and flow to its greatest potential. The Quick-attach hook-up is mounted directly to the back of the fan housing and braced to all four corners of the blower for extra rigidity.

HH SERIES - OPTIONS

Flex Hood Bolt-on cutting edge Wing edges Hydraulic motor for hood turner Electric-hydraulic cylinder Truck loading chute

---

- return to top of page -

---

Smyth Welding & Machine Shop Ltd.

37452 Glen’s Hill Road
R. R. #2
Auburn, Ontario
N0M 1E0

Voice: 519-529-7212
Fax: 519-529-3277